Choppers

PATZ 9427 CHOPPERS

No matter where you use it, the 9427 Chopper will save you time and labor!

Patented unique, one-piece, four-point, reversible Quadra-Shark® blade is designed for chopping and long life
Available in portable, stationary with bottom discharge, stationary chopper with blower, and 3-point hitch chopper with blower units
Multiple power options – gas, electric, or PTO
Fire extinguisher comes standard on all units
All controls are grouped together for convenient and easy operation
Adjustable, 7-position grate controls length-of-cut of material

Chop ingredients:

Hay
Alfalfa
Shelled Corn (with optional screen)
Chocolate
Emu feed (with optional screen)
Straw for mulching and bedding
Wood Shavings (with optional screen)
Pine Straw (with optional screen)
Newspaper
Recycled plastic bottles
Excelsior
Poultry mortalities (stationary bottom discharge unit only)
Dry compost materials

	Power Source	Rotor Speed	Discharge Location	Number of Quadra- Shark® Blades	View Full Specs
Portable	• Honda 13 HP, 1 cylinder, recoil or electric start • Briggs & Stratton 16-HP, 2 cylinder, V-twin, recoil start • 3 HP single phase electric motor	2850 RPM	Side	20
Stationary with Bottom Discharge	• Electric motor 3 or 5 HP • Electric motor 10 HP (chopper with screen)	2850 RPM	Bottom	20
Stationary with Blower	• Briggs & Stratton 16 or 18 HP, 2 cylinder, V-twin, recoil start • Electric motor 5, 7-1/2, or 10 HP	2850 RPM	Blower	13
3 Point Hitch with Blower	• 540 RPM (6 spline) PTO drive line	2850 RPM	Blower	13

STANDARD FEATURES AND OPTIONS:

ROTOR: Multiple rotor blades in a spiral mounting provide fast, efficient cutting. Large 5-inch- (127 mm-) diameter, diecast aluminum spacers reduce wrapping. The 1-1/2-inch (38 mm) diameter hex shaft is strong to handle the torque. The rotor speed of 2,850 RPMs cuts at a high-volume rate. There is a double-belt drive to the rotor. Reverse or replace blades quickly and easily. Simply flip up the hinged deck and remove the rotor shaft. The belts can be easily removed from the rotor shaft pulley. Also, there are no knives to unbolt or bolt together.
STANDARD-CUT GRATE: An adjustable grate is standard equipment for the portable chopper. The grate and rotor are designed for short chopping of straw, hay, bark, plastics, and many more materials. Each 1/4-inch (6 mm) thick grate finger is welded at both ends to the two full-length grate shafts for rigidity.
QUADRA-SHARK® ROTOR BLADE: Patented unique, one-piece, four-point, double-edge rotor blade is designed for chopping and long life. The 3/16-inch (4.7 mm) thick, through-hardened steel blades are beveled and serrated for effective cutting action and provide plenty of strength for tough cutting conditions. No bolts, rivets, or welds on the blade, so snagging or wrapping of material is greatly reduced. Enjoy trouble-free performance from this rotor blade, whether chopping newspaper, hay, straw, or other material. Quadra-Shark® is a registered trademark of Patz Corporation.
SEVEN POSITION-GRATE CONTROL: A single-handle, seven-position grate control allows varying length of cut and adjusts material flow rate. Two-bolt flange rotor shaft bearings are mounted outside the chopper frame to minimize contamination and allow easy lubricating and servicing.
POLYETHYLENE DECK COVER: The polyethylene deck top eliminates metal-to-metal contact and provides easy tub rotation. Also, the polyethylene deck top along with the polyethylene tub skirt form a tight seal to help prevent leakage of paper and other materials. Grippers hold the bale as the steel tub rotates.
HINGED DECK: The deck is hinged to tilt away for convenient inspection of the rotor.
CONVENIENT CONTROLS: All controls are grouped together for convenient and easy operation. Labels indicate clearly what each lever controls and direction to move it.
FIRE EXTINGUISHER: Class ABC rated fire extinguisher is standard on all 9427 Chopper units.

Visit Site for More Info